群馬大学大学院理工学府　環境創生部門　佐藤研究室

研究業績

原著論文

研究業績（2010年以降）

2023年

1. F. Li, N. Kannari, J. Maruyama, K. Sato,  H. Abe, “Defective multi-element hydroxide nanosheets for rapid removal of anionic organic dyes from water and oxygen evolution reaction, J. Hazard. Mater., 447 (2023) 130803

2022年

1. Y. Inaba, K. Sato, N. Kannari, H. Abe, A. Sciazko, N. Shikazono, “Growth of Strontium-doped Lanthanum Chromium Manganite/Gadolinium-doped Ceria (LSCM/GDC) Nanocomposite Particles as Ni-free Solid Oxide Fuel Cell Anode Material”, 燃料電池(The J. Fuel Cell. Technol.), 21 [4] (2022) 79-83
2.  N. Duongbia, N. Kannari, K .Sato, T. Takarada, S. Chaiklangmuang, “Production of bio-based chemicals from palmitic acid by catalytic hydrotreating over low-cost Ni/LY char and limonite catalysts”, Alex. Eng. J., 61 [8] (2022) 3105-3124

2021年

1. T. Horimoto, N. Kannari, K. Sato, “Boron-Carbon-Nitrogen-Containing Heterogeneous Catalysts for Base-Catalyzed Reaction”, Appl. Surf. Sci., 558 (2021) 149841.

2020年

1. B. Tsedenbal, N. Kannari, K. Sato, H. Abe, H. Shirai, T. Takarada, “Effect of Hydrogen Sulfide on the Combustion Reactivity of Ilmenite Ores with Coal Volatiles under Steam Reforming”,Energy Fuels., 34 (2020) 9862-9871
2. K. Sakamoto, F. Hayashi, K .Sato, M. Hirano, N. Ohtsu, “XPS spectral analysis for a multiple oxide comprising NiO, TiO₂, and NiTiO₃”, Appl. Surf. Sci., 526 (2020) 146729
3. R. Akama, T. Okabe, K. Sato, Y. Inaba, N. Shikazono, A. Sciazko, J. Taniguchi, “Fabrication of a micropatterned composite electrode for solid oxide fuel cells via ultraviolet nanoimprint lithography”, Microelectron. Eng., 225 (2020) 111277
4. T. Tanino, K. Shibuki, K. Kubota, N. Kannari, M. Matsui ,T. Ohshima, “Removal of volatile organic compounds in distillation steam by DBD decomposition treatment for water recycling in fermentation industry”, Int. J. Plasma Environ. Sci. Technol. 14 (2020) e02003
5. N. Kannari, T. Uesugi, K. Kubota, D. Masuda, K. Sato, T. Takarada, T. Watanabe, “Calcium-enriched biochar: Pyrolysis of digested sludge, phosphorus recovery, and fertilizer properties”, J. Jpn. Inst. Energy, 99 (2020) 236-242.

1. K. Sato, C. Iwata, N. Kannari, H. Abe, “Highly Accelerated Oxygen Reduction Reaction Kinetics in Colloidal-Processing-Derived Nanostructured Lanthanum Strontium Cobalt Ferrite/Gadolinium-doped Ceria Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells”, J. Power Sources, 414, (2019), 502-508
2. H. Abe, A. Kondo, K. Sato, “Free-Polymer-Induced Gelation of Non-Aqueous Colloids for Direct Ink Writing, Ceramics in Modern Technologies, in press 
3. H. Abe, K. Kuruma, M. Takahashi, K. Sato, T. Naka, Y. Suzuki, “Magnetite nanocrystal clusters transformed from ferric precursor and their colloidal magnetorheology,”, IOP Conf. Ser.: Mater. Sci. Eng.,479, (2019) , 012043
4. B. Tsedenbal, N. Kannari, K. Sato, H. Abe, H. Shirai, T. Takarada, Reforming of coal volatiles over limonite ore”, Fuel Processing Technol., 192 (2019) 96-104
5. H. Abe, T. Naka, K. Sato, Y. Suzuki, M. Nakano, “Shape-Controlled Syntheses of Magnetite Microparticles and Their Magnetorheology”, Int. J. Mol. Sci., 20 (2019) 3617 (Open access)    

1. S. Chaiklangmuang, L. Li, N. Kannari, T. Takarada, Performance of active nickel loaded lignite char catalyst on conversion of coffee residue into rich-synthesis gas by gasification, J. Energy Inst., 91 (2018) 222-232
2. K. Morita, T. Suzuki, Y. Nishimura, K. Matsumoto, C. Numako, K. Sato, M. Nakayama, R. Sasaki, C. Ogino, A. Kondo, “In vivo tissue distribution and safety of polyacrylic acid-modified titanium peroxide nanoparticles as novel radiosensitizers”, J. Biosci. Bioeng.,126[1] (2018) 119-125

1. T. Hatori, K. Morishita, N. Kannari, T. Takarada, Development of Nickel-loaded Catalysis from Microwave-treated Woody Biomass for Decomposition of Biomass Tar, J. Jpn. Inst. Energy, 96 (2017) 519-524
2. N. Kannari, C. Satomi, Y. Oyama and T. Takarada, Durability studies of limonite ore for catalytic decomposition of phenol as a model biomass tar in a fluidized bed, Biomass Bioenergy 107 (2017) 86-92
3. N. Kannari, Y. Oyama and T. Takarada, Catalytic decomposition of tar derived from biomass pyrolysis using Ni-loaded chicken dropping catalysts, Int. J. Hydrogen Energy, 42 (2017) 9611-9618
4. T. Hatori, K. Morishita, N. Kannari, T. Takarada, Study of nickel adsorption properties of chemically treated woody biomass, J. Jpn. Inst. Energy, 96 (2017) 139-143

1. M. Nakayama, R. Sasaki, C. Ogino, T. Tanaka, K. Morita, M. Umetsu, S. Ohara, Z. Tan, Y. Nishimura, K. Sato, C. Numako, S. Takami, A. Kondo, “Titanium peroxide nanoparticles enhanced cytotoxic effects on X-ray irradiation against pancreatic cancer model through reactive oxygen species generation in vitro and in vivo”, Radiat. Oncol., (2016) 11:91
2. B. Kongsomart, N. Kannari, T. Takarada, Catalytic Effects Of Biomass-derived Ash On Loy Yang Brown Coal Gasification, International Journal of Biomass & Renewables, 5 (2016) 12-22
3. G. Hasegawa, K. Kanamori, N. Kannari, J. Ozaki, K. Nakanishi, T. Abe, Studies on electrochemical sodium storage into hard carbons with binder-free monolithic electrodes, J. Power Sources, 318 (2016) 41-48
4. H. Inoue, T. Ishii, N. Kannari, J. Ozaki, Electrochemical Properties of an Atomically Dispersed Platinum Catalyst Formed on a Heat‐treated Carbon Support, Chemistry Select, 1 (2016) 3189-3196

1. K. Sato, K. Horiguchi, T.Nishikawa, S. Yagishita, K. Kuruma, T. Murakami, H. Abe, “Hydrothermal Synthesis of Yttria-Stabilized Zirconia Nanocrystals with Controlled Yttria Content”, Inorg. Chem., 54 [16], (2015) 7976–7984
2. A. Yoshino, R. Yamato, K. Sato, T. Takarada, “Cu Recovery from Industrial Wastewater using Brown Coal”,Fuel Process. Technol., 136, (2015) 64-67
3. Z.-Q. Tan, K. Sato, S. Ohara, “Synthesis of layered nanostructured TiO₂ by hydrothermal method”, Adv. Powder Technol., 26 [1], (2015) 296-302
4. G. Hasegawa, K. Kanamori, N. Kannari, J. Ozaki, K. Nakanishi, T. Abe, “Hard Carbon Anodes for Na-ion Batteries: Toward a Practical Use”, ChemElectroChem, 2 (2015) 1917-192
5. 神成尚克, 成塚久美, 尾崎純一, “ナノシェル含有カーボンの酸素還元活性に及ぼす表面金属錯体の寄与”, 炭素, 269 (2015) 195-200
6. N. Kannari, T. Itakura, J. Ozaki, “Electrochemical oxygen reduction activity of intermediate onion-like carbon produced by the thermal transformation of nanodiamond”, Carbon, 87 (2015) 415-417

1. K. Sato, M. Arai, J. C. Valmalette, H. Abe, “Surface Capping-Assisted Hydrothermal Growth of Gadolinium-doped CeO₂ Nanocrystals Dispersible in Aqueous Solutions”, Langmuir, 30 [40], (2014) 12049–12056
2. A. Yoshino, H. Hori, K. Sato, T. Takarada, “Cu Recovery from Industrial Wastewater via Low Temperature Combustion of Cu-loaded Brown Coal”, J. Jpn. Inst. Energ., 93 [6], (2014) 542-547
3. I-P. Cao, X. Huang, X.-Y. Zhao, B.-S. Wang, S. Meesuk, K. Sato, X.-Y. Wei, T. Takarada, “Low-temperature catalytic gasification of sewage sludge-derived volatiles to produce clean H₂-rich syngas over a nickel loaded on lignite char”, Int. J. Hydrogen Energy, 39 [17], (2014) 9193-9199
4. 堀口　和哉、佐藤　和好、宝田　恭之、“BaSnO₃の形態がタール改質活性に及ぼす影響”, 粉体工学会誌, 51[3] (2014)153-162
5. T. Ishii, S. Kashihara, Y. Hoshikawa, J. Ozaki, N. Kannari, K. Takai, T. Enoki and T. Kyotani, “A quantitative analysis of carbon edge sites and an estimation of graphene sheet size in high-temperature treated, non-porous carbons”, Carbon, 80 (2014) 135-145

1. Z.-Q.Tan, K, Sato, S. Takami, C. Numako, M. Umetsu, K. Soga M. Nakayama, R. Sasaki, T. Tanaka, C Ogino, A. Kondo, K. Yamamoto, T. Hashishin, S. Ohara, “Particle size for photocatalytic activity of anatase TiO₂ nanosheets with highly exposed {001} facets”, RSC Advances, 3 [42] (2013), 19268-19271
2. S. Meesuk, K. Sato, J. P. Cao, A. Hoshino, K. Utsumi, T. Takarada, “Catalytic Reforming of Nitrogen-Containing Volatiles Evolved through Pyrolysis of Composted Pig Manure”, Bioresource Technol., 150 (2013) 181-186
   森　勝伸, 上村　卓寛, 郡司　文音, 金子 啓一, 佐藤　和好, 宝田　恭之, 板橋 英之, “家畜排せつ物コンポストの低温ガス化プロセスにおける硫黄及び塩素の放出挙動の分析と固体残渣の脱硫・脱塩への応用”, 分析化学, 62 [10] (2013) 915-924
3. S. Meesuk, J. P. Cao, K. Sato, A. Hoshino, K. Utsumi, T. Takarada, “Nitrogen Conversion of Pig Compost during Pyrolysis”, J. Chem. Eng. Japan, 46 [8] (2013) 556-561
4. K. Sato, S. Suemune, K. Nitta, C. Nakayama, S. Inokuma, S. Tonooka, Y. Mamada, E. Nakamura, K. Kaneko, T. Takarada, “A Simple Fabrication Route of Activated Carbons from Chicken Droppings”, J. Anal. Appl. Pyrol., 101 (2013) 86-89
5. K. Sato, Y. Yokoyama, J. C. Valmalette, K. Kuruma, H. Abe, T. Takarada, “Hydrothermal Growth of Tailored SnO₂ Nanocrystals”, Cryst. Growth Des., 13 [4], (2013) 1685-1693
6. X. B. Xiao, J. P. Cao, X. L. Meng, D. D. Le, L. Li, Y. Ogawa, K. Sato, T. Takarada, “Synthesis gas production from catalytic gasification of waste biomass using nickel-loaded brown coal char”, Fuel, 103, (2013) 135-140
7. N. Kannari, M. Takigami, T. Maie, H. Honda, S. Kusadokoro and J. Ozaki,“Nanoshell-Containing Carbon Cathode Catalyst for Proton Exchange Membrane Fuel Cell from Herbaceous Plants Lignin”, Smart Grid and Renewable Energy, 4 (2013) 10-15
8. N. Kannari, Y. Nakamura and J. Ozaki, “Sculpture preparation of crystalline mesoporous carbons from nanoshell-containing carbon”, Carbon, 61 (2013) 537-542

1. H. Abe, M. Naito, K. Sato, “Mechanically Assisted Deposition of Nikel Oxide-Ytttria Stabilized Zirconia Nanocomposite Film and its Microstructural Evolution for Solid Oxide Fuel Cells Anode Application”, Int. J. Appl. Ceram. Technol., 9 [5] (2012) 928-935
2. J. Han, S. Ohara, K. Sato, H. Xu, Z. Q. Tan, Y. Morisada, K. Kuruma, M. Naito, P. Shan, M. Umetsu, “Directed Assembly of metal Oxide Nano Particles by DNA”, Mater. Lett., 79 (2012) 78-80
3. S. Meesuk, J. P. Cao, K. Sato, Y. Ogawa, T. Takarada, “The effects of temperature on product yields and composition of bio-oils in hydropyrolysis of rice husk using nickel-loaded brown coal char catalyst”, J. Anal. Appl. Pyrol., 94 (2012) 238-245
4. K. Sato, M. Naito, H. Abe, “Electrochemical and mechanical properties of solid oxide fuel cell Ni/YSZ anode fabricated from NiO/YSZ composite powder”, J. Ceram. Soc. Japan 119 [1395] (2011) 876-883
5. S. Meesuk, J. P. Cao, K. Sato, Y. Ogawa and T. Takarada, “Study of Catalytic Hydropyrolysis of Rice Husk under Nickel-Loaded Brown Coal Char”, Energy Fuels, 25 [11], (2011) 5438-5443
6. H. Inoue, K. Hosoya, N. Kannari and J Ozaki, “Influence of heat-treatment of Ketjen Black on the oxygen reduction reaction of Pt/C catalysts”. J. Power Sources, 220, 173-179 (2012)
7. N. Kannari and J. Ozaki, “Formation of uniformly and finely dispersed nanoshells by carbonization of cobalt-coordinated oxine–formaldehyde resin and their electrochemical oxygen reduction activity”, Carbon, 50, 2941-2952 (2012)

1. S. Meesuk, J. P. Cao, K. Sato, Y. Ogawa and T. Takarada, “Fast Pyrolysis of Rice Husk in a Fluidized Bed: Effects of the Gas Atmosphere and Catalyst on Bio-oil with a Relatively Low Content of Oxygen”, Energy Fuels, 25 [9], (2011) 4113-4121
   J. Cao, X. Xiao, S. Zhang, X. Zhao, K. Sato, Y. Ogawa, X. Wei, T. Takarada, “Preparation and characterization of bio-oils from internally circulating fluidized-bed pyrolyses of municipal, livestock, and wood waste”, Bioresource Technnol, 102 [2], (2011) 2009-2015
2. N. Hobara, K. Takizawa, A. Hagiwara, K. Sato, H. Abe, M. Naito, “Effect of Process Parameters on Electrochemical Properties of Mechanically Prepared Composite Powders for Solid Oxide Fuel Cells, Adv. Powder Technol, 22 [1], (2011) 102-107
3. N. Kannari and J. Ozaki, “Formation of non-planar carbon layers in naphthalene-pitch-derived carbon by addition of fullerene mixture and its influence on electrochemical oxygen reduction reaction”, Tanso, 241 (2011) 102-104

1. X. Y. Zhao, J. P. Cao, K. Sato, Y. Ogawa, T. Takarada, “High Surface Area Activated Carbon Prepared from Black Liquor in the Presence of High Alkali Metal Content” J. Chem. Eng. Japan, 43 [12] (2010) 1029-1034
2. Z. Tan, H. Chihara, C. Koike, H. Abe, K. Kaneko, K. Sato, S. Ohara, “Interstellar Analogs from Defective Carbon Nanostructures Account for Interstellar Extinction”, Astro. J.,140 [5], (2010) 1456-1461
3. S. Ohara, K. Sato, Z. Tan, H. Shimoda, M. Ueda, T. Fukui, “Novel mechanochemical synthesis of fine FeTiO₃ nanoparticles by a high-speed ball-milling process, J. Alloys Comp., 504 [1], (2010) L17-L19
4. K. Sato, T. Kinoshita, H. Abe, “Performance and Durability of Nanostructured LSM/YSZ Cathode for Intermediate Temperature Solid Oxide Fuel Cells”, J. Power Sources, 195 [13], (2010) 4114-4118
5. K. Sato, T. Kinoshita, H. Abe, “Fine-microstructure Mediated Efficient Hydrogen Oxidation in Ni/YSZ Anode Fabricated from Novel Co-precipitation Derived Nanocomposites”, Fuel Cells, 10 [2] (2010) 320-324
6. K. Sato, H. Abe and S. Ohara, “Selective Growth of Monoclinic and Tetragonal Zirconia Nanocrystals”, J. Am. Chem. Soc., 132 [8], (2010) 2538-2539
7. S. Ohara, Z. Tan, J. Noma, T. Hanaichi, K. Sato and H. Abe “Collision synthesis of unique carbon nanomaterials inspired by the Allende meteorite Collision synthesis of unique carbon nanomaterials inspired by the Allende meteorite”, Solid State Comm., 150 [3-4], (2010) 198-200
8. 神成尚克, 高草木啓太, 尾崎純一, 原田靖之, 安楽太介, 藤本英和, “グニエラ炭のコークス化に及ぼすFe₂O₃およびCaCO₃添加の影響”, 鉄と鋼, 96, (2010) 249-257
9. N. Kan-nari, S. Okamura, S. Fujita, J. Ozaki and M. Arai, “Nitrogen-doped carbon materials prepared by ammoxidation as solid base catalysts for Knoevenagel condensation and transesterification reactions”,  Adv. Synth. Catal., 352, 1476-1484 (2010)

著書・解説

[著書]

1. 佐藤　和好、阿部　浩也, “ナノコンポジット粒子を用いた電極構造制御による固体酸化物燃料電池の高性能化”, エレクトロニクス用セラミックスの開発、評価手法と応用((株)技術情報教会), 第5章, 第3節 pp179-pp190    

2. 石井孝文、神成尚克、小林里江子、尾崎純一、“カーボンブラックを上手に使用する処方箋（分担 第４章２節 表面カ―ボンアロイングによるカーボンブラックの機能化）”、R＆D支援センター、2017年

3. 佐藤　和好，“有機分子を援用した水熱合成による無機ナノ結晶の精密構造制御”，粉・粉体の構造制御，表面処理とプロセス設計((株)技術情報教会) (2013) p66-p71

[解説]

1. 佐藤　和好, “ガス吸着法を用いた微粒子の比表面積評価”, 溶射, 53 (2016) 61-65
   
2. 神成尚克, “炭素構造の解析法とコークス分野への応用”, 日本エネルギー学会誌, 95 (2016) 541-547
3. 小島由美、亀山豊文、山口正夫、神成尚克、宝田恭之、“感性を育み、コミュニティーを繋ぐ低炭素社会構築のための未来創生塾”、日本エネルギー学会誌、95 (2016) 987-993
4. 佐藤　和好，“ガス吸着法を用いた粉体の比表面積および細孔分布評価”，セラミックス, 49 (2014) 302-308
5. 佐藤　和好、宝田　恭之,　“廃棄物系バイオマスからの活性炭製造とその蓄電デバイスへの応用”, ケミカルエンジニヤリング, 58 (2013) 44-49
6. 佐藤　和好, “セラミックスナノ結晶の精密設計に基づく固体酸化物燃料電池の高性能化”,粉体工学会誌, 49(1) (2012) 35-41
7. 大原　智、佐藤　和好,“ハイブリッドセラミックスナノマテリアルの創製”, セラミックデータブック, 38 (2010) 136-139
8. 神成尚克, 松井雅義、尾崎純一, “燃料電池用カーボンアロイカソード触媒”, 化学工学, 74, (2010) 465-467
9. 神成尚克, 尾崎純一, “現代の錬金術　炭素をベースとする白金代替触媒の開発状況”, 化学, 65, 71-72 (2010)

公開特許

1. 藤村　亜紀、赤松　徳康、安丸　純一、宝田　恭之、佐藤　和好, “活性炭の製造方法” 特許公開2012-101948
2. 木下　暢、篠崎 良太、佐藤　和好、阿部　浩也、内藤　牧男, “複合セラミックス粉体及びその製造方法並びに固体酸化物形燃料電池” 特許公開2011-190148
3. T. Kinoshita, K. Sato, H. Abe, M. Naito, “Composite Ceramic Powder, Process for Production of Same and Solid Oxide Fuel Cell”, PCT/JP2009/061744
4. 木下　暢、佐藤　和好、阿部　浩也、内藤　牧男, “複合セラミックス粉体及びその製造方法並びに固体酸化物形燃料電池” 特許第5207344号
5. 佐藤　和好、阿部　浩也、大原　智、福井　武久, “金属酸化物分散液およびその製造方法” 特許公開2010-111536
6. 木下　暢、佐藤　和好、阿部　浩也、内藤　牧男, “複合セラミックス粉体及びその製造方法並びに固体酸化物形燃料電池”特許第5375063号

受賞

1. 佐藤　和好, 第25回横山科学技術賞 受賞　”ナノ粒子精密合成を基盤とする超高出力・超高効率燃料電池の開発”(2021.9)
2. 稲葉　佳生, ”La0.75Sr0.25Cr0.5Mn0.5O3-d/ Gd0.2Ce0.8O1.9ナノコンポジットSOFCアノードの水素酸化活性”, FCDIC優秀プレゼンテーション賞, 燃料電池開発情報センター(2021.9.2)
3. Naokatsu KANNARI, Takumi UESUGI, Keiichi KUBO, Daichi MASUDA, Kazuyoshi SATO, Takayuki TAKARADA, Tomohide WATANABE, 日本エネルギー学会論文賞, “Calcium-enriched Biochar: Pyrolysis of Digested Sludge, Phosphorus Recovery, and Fertilizer Properties”日本エネルギー学会誌2020年12月号236頁掲載（J.Jpn.Inst.Energy,99(2020)236-242）
4. Naokatsu Kannari, T. Uesugi, K. Kubota, D. Masuda, K. Sato, T. Takarada, T. Watanabe, 日本エネルギー学会論文賞, “Calcium-enriched Biochar: Pyrolysis of Digested Sludge, Phosphorus Recovery, and Fertilizer Properties”K. Horiguchi, K. Sato, Award for Encouragement of Research in IUMRS-ICA2014 (2014.10)
5. 新井　愛未,佐藤　和好, J. C. Valmalette, 阿部 浩也,優秀プレゼンテーション賞(2014.9)
6. K. Sato, The 15th International Conference on Thin Films, Award for Encouragement of Research in Thin Films (2011.11)
7. 佐藤　和好, 平成23年度日本エネルギー学会奨励賞 (2011.11)
8. 佐藤　和好,日本エネルギー学会石炭科学会議優秀賞(第48回石炭科学会議) (2011.10)

招待講演

1. 佐藤　和好, “ナノ結晶の精密合成と分散制御を基盤とした高機能ハイブリッドナノマテリアルの創製”, 日本セラミックス協会 2016年度年会 サテライトプログラム「ナノマテリアル科学の最前線」, 早稲田大学(東京), 2016年3月14日
2. K. Sato, J. C. Valmalette, H .Abe, “Aqueous Growth of High Quality Ceramic Nanocrsytals and Nano-composites”, The 9th International Conference on the Science and Technology for Advanced Ceramics (STAC-9) & The 9th International Symposium on Transparent Oxide and Related Materials for Electronics and Optics (TOEO-9), Epocal Tsukuba, Japan, October 19-21, 2015
3. K. Sato, “Surface Capping Assisted Hydrothermal Growth of Tailored Ceramic Nanocrystals”, Materials Science & Technology 2014, David L. Lawrence Convention Center, Pittsburgh, PA, USA, October 12-16, 2014
4. K.Sato, Y. Yokoyama, M. Arai, K. Horiguchi, J.-C. Valmalette, H. Abe, “Hydrothermal Growth of Tailored Oxide Nanocrystals”, IUMRS-ICA2014, Hukuoka University, Japan, August 24-30, 2014
5. K. Sato,“Hydrothermal Growth of Tailored SnO₂ Nanocrystals”, Workshop of Advanced Nanocrystals and Processing towards Low Carbon Society, Osaka University, 2014年2月19-20日
6. 佐藤　和好, 横山 陽平, 阿部 浩也, 宝田 恭之, “液相プロセスを用いた酸化物ナノ結晶の精密構造制御”, 表面技術協会関東支部第84回講演会, 芝浦工業大学(東京), 2012年11月26日
7. 佐藤　和好, “水溶液プロセスを用いたナノ結晶の精密構造制御”, 粉体工学会 2012年度粉体操作に伴う諸現象に関する勉強会, 山喜旅館(静岡), 2012年8月2-3日
8. 佐藤　和好, 宝田　恭之, 大原 智, 阿部　浩也, “単斜晶および正方晶ジルコニアナノ結晶の選択成長”, 日本セラミックス協会第24回秋季シンポジウム, 北海道大学(北海道), 2011年9月7-9日

学会発表